High Quality Walk Through Metal Detector, Walkthrough Metal Detector, Handheld Metal Detector Suppliers in China

Home > Products > Walk Through Metal Detector > Archway Metal Detector > Archway safety-check machine,walk through remote control metal detector

Archway safety-check machine,walk through remote control metal detector

Basic Info

Model No.: JH-4

Product Description

Remote control Walk Through Metal Detector

 

1.Professional choice for metal detection:

 

 Adopt the most advanced digital detecting technology in the world , JH series scanner gate is special for detecting  metal and alloy articles concealed in human body. It is highly safe, widely applicable and highly sensitive with a wide detecting range and a good anti-interference capability.  The user can configure the gate according to the size and weight of the article for detection to exclude error alarm for coins, keys, jewelries and belt buckles. It is applicable in the places such as factories, mines, banks and luxuries houses, where expensive metal articles may get lost easily; and places such as airport, customhouse, jails, exhibition halls, where dangerous metal articles are prohibited.  

 

2.Reasons to choose JH walk-through metal detector:

 

A. Deters crime 
B. Improves traffic flow 
C. Reduces the number of required searches 
D. Reduces workload of security personnel 
E. Reduces false alarms 
F. Increases Building safety with minimal cost 
G. Durable material adoption 

 

This walk-through metal detector can be used in the factory, prison, court, exhibition hall, stadium and entertainment lieu, where the prohibited articles need to be checked for safety. 

 

 

3.Technical Parameter:

 

 

Meet a  criterion  << GB 15210-2003. General Specification of walk-through metal detector >> National Standard
Detecting process 100 degrees of sensitivity to meet with requirements in various occasions.
Basic safety  meet the requirements of GB4793
Personal safety   meet the requirements of NILECJ-0601
Percent of pass   above 60 meantime/ minute
Electrical source 90-240vAC ,50/60 Hz
Power  consumption 35W
Working environment  -20°C~45°C,≤95%RH
Overall sizes(mm)  2200 (height) x 790 (width) x 540 (depth) .
Size of alley(mm)  2000 (height) x 700  (width ) x 540 (depth )
NW/GW 73kg/85kg

 

4. Function and characteristics 

 

A,Easy Assembly

The JH-4 modular design allows for a quick and very simple assembly. only 8 (eight) screws.

are required for.

 

B,6 display Area Detect 18 distinct Zones

JH-4 offers a 6 display area detect 18 distinct zones for full target coverage on the left, center and right side of the body from head to toe.

 

C,Entry Pacing Lights

Smooth, efficient traffic flow with easy-to-view, eye-level pacing lights on the entrance side of each panel.

 

D,Overhead Control Unit

LED Display, alarm lights, LED bar graphs and control touchpads plus all wiring, connections and electronics are integrated into the overhead compartment.

 

E,Audible and Visual Alarms

Audible alarm and Visual LED lights signal when a target has been detected.

 

F,High adjustable sensitivity

JH-4 series digital scanner gate is adjustable. In the highest volume, articles as small as a paper clip can be detected and indicated.

 

5.Password protection.

 

JH-4 is designed for use by authorized personnel with multi-level security codes. It only allows authorized users to change settings.

  

No battery is required for memory retention maintains all settings even when disconnected from power and does not require recalibration each time the unit is turned OFF and back ON. No battery is required for memory retention. While the unit is in operation, a self-test of all systems is performed continuously with any failures or problems immediately reported on the LCD display.

 

1,Harmless to human body

 Using sensitive metal detecting technology is harmless to heartbeat implement in human body, magnetic software, tapes and video recording tapes

 

2,Traffic Counter
Counter tracks the number that have passed through the detector, the number of alarms.

·        

3,Synchronization
Dual channels and DSP circuitry allow several JH series scanner gates to operate simultaneously in close proximity to one another.

·        

4,Warranty :Limited 12 months, parts and labor

·        

5,Dimensions

·        

6,Outer frame: 2.2 X0.79 X0.54m ( H X W X Depth)

·        

7,Inner frame: 2.0X0.7X0.540m  (H X W X Depth) 

·        

8,Electric current: 220V Power: 35VA              Net Weight: about 75kg

·        

9.work envionment: -30-+45                    Standard: GB15210-2003

·        

10.Optional accessories
Remote control
ABS plastic base for protection

 

 

  

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Categories : Walk Through Metal Detector > Archway Metal Detector

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters