High Quality Punching Needle Roller for Food Industry, Medicine Punch Needle Roller, Band-aid Material Punching Suppliers in China

Home > Products > Industry Needle Detector > Plaster mask heating punch shaft

Plaster mask heating punch shaft

Plaster mask heating punch shaft

    Min. Order: 1 Set/Sets
    Brand: YIHONG
    Transportation: Ocean
    Place of Origin: China
    Port: shanghai

Product Description

The non-woven punching wheel shaft, precision punching needle roller and heated punching needle roller developed and designed by our company are all imported alloy steel wire needles, which have high strength and good wear resistance.
The Needle Roll is widely used in the pharmaceutical industry, such as perforated Band-Aids and plaster skins. Holes, such as those used in the food industry for sauce stirring.
Heated punching pin rolls are generally hard aluminum alloys. The needle ring material is steel needle, which can be treated without heavy metal rust, which greatly prolongs the service life.
Existing specifications: needle tip diameter ¢60~¢200

Plaster mask heating punch shaft

Precautions for film punching pin rolls
Before starting the machine, check whether each part is normal, set the parameters of the grating micrometer sensor according to the thickness of the material, and set the temperature of the heated perforated needle roller according to the process requirements. When the temperature reaches the set value, put the material on the unwinding reel. Then lock the tensioner to hold the material on the unwinder. At the same time, fix the winding paper core tube on the winding shaft, and pull the material to the outlet of the heated perforated needle roller according to the road map: adjust the position of the photoelectric deviation correction device at the same time. Start the motor switch to run at low speed. At this time, the S-knife and the rubber roller are pressed at the same time, and the material is manually pulled to the stop of the winding shaft. The peeled part of the release layer on the surface of the material is pasted on the winding paper core, and the motor switch is turned on again, and the speed is adjusted according to the working state. When the tail end runs to the position of the thickness gauge, the machine stops automatically. At this point the thickness detector can be turned off and run to the end of the material.


The quality and reliability and stability of our Automatic punching machine and various needle rollers are at the domestic advanced level. Needle rollers and needle rings of various special specifications can be produced according to customer requirements. Welcome customers to consult.

Changzhou Puyisen Machinery Technology Co., Ltd.

  • 1
  • 2
  • 3
  • 4
  • 5
 

Changzhou Puyisen Machinery Technology Co., Ltd. is located in Wujin District, Changzhou, a long-standing and culturally rich Yangtze River Delta Economic Zone. It is close to Shanghai and Nanjing, with superior geographical location, good investment environment and fast and convenient transportation. Our company is specialized in manufacturing and selling, polypropylene spunbond non-woven fabric production equipment, polyester filament needle punched non-woven fabric production line, meltblown non-woven fabric production equipment. Pu Yisen Technology has independently developed and innovated, and successfully developed non-woven fabric punching machines, plastic film ultra-micro punching equipment and hot-pressing equipment, as well as air-permeable and water-impermeable ultra-micro hole punching equipment for packaging materials.


Company Info

  • Company Name: Changzhou Puyisen Machinery Technology Co., Ltd.
  • Representative: Yuanle Chen
  • Product/Service: Non Woven Fabric Machine , Spunbond Non-woven Fabric Line , Melt Blown Machine , Melt Blown Non Woven Fabrics Line , PP Spunbond Non Woven Machine , Needle Roll Punching Machine
  • Capital (Million US $): 5000000RMB
  • Year Established: 2018
  • Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
  • Export Percentage: 41% - 50%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 20
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: no
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: 18 Wenya Road, Qianhuang Town, Wujin District
  • Contact Person: Ms. HX
  • Tel: 86--15380453786
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters